2017 Mahindra 2538 HST
Call for Price
Economical and Easy to operate - The latest addition to the Mahindra Tier IV portfolio, the 2538 is designed for general purpose farming and ag, livestock operations and grounds maintenance.
Industry Leading Warranty: Mahindra tractors are in it for the long haul, which is why they’re backed by our industry leading 7-year limited powertrain warranty.
- Revolutionary Tier IV mCRD technology
- Powerful, reliable 37hp 4-cylinder engine
- Flat deck platform
- Modern dash and switches
- Redesigned front grill
- Hood lifts high, panels come off, no tools required
- Tilt Wheel
- Great visibility
- Rounded fenders
- Shifters at operators sides, not on the floor
- Type: Naturally aspirated direct-injection diesel
- Cylinder: 4
- Engine HP (kW) @rpm: 37.4 (27.5) @ 2400
- Compression Ratio: 18.7:1
- Displacement cubic inch3 (cc): 166.7 (2732)
- Fuel Tank Capacity: 9.0 gallons
- Battery Capacity: 12 V, 80 AH
- Alternator: 12 V 45A
- Type: Damper
- Type: HST-3 range
- Number of Gears/Speeds: Infinite
- Type: Hydrostatic/tiltable
- Pump Output (gallons per minute): 4.1
- Type: Wet disc
- Type: Open Center with position control
- Pump Output (gallons per minute): 7.6
- 3-Point Linkage: Category 1 with check chains
- Lift Capacity (lbs.): 2646
- Rear Auxiliary Remote Valves: 1 spool optional
- Type: Independent
- PTO RPM (engine rpm): 540 @ 2400
- PTO HP (kW): 31 (23.1)
- Total (lbs): 3130
- Overall Length Inches (mm): 119.3 (3030)
- Overall Width Inches (mm): 63.2 (1605)
- Overall Height Inches (mm): 94.4 (2400)
- Turning Radius Minimum Feet (meters): 7.87 (2.4)
- Ag (Front/Rear): 7-16 6PR / 11.2-24 4PR
- Industrial (Front/Rear): 10-16.5 / 43x16-20
- Turf (Front/Rear): N/A
- Loader Model: 2538L
- Maximum Lift Height: 101.4 in.
- Clearance with Bucket Fully Dumped: 79.3
- Reach at Maximum Dump Angle: 21.5
- Maximum Dump Angle: 40 deg.
- Attachment Rollback Angle: 30 deg.
- Digging Depth Below Grade: 4.5 in.
- Lift Capacity to Maximum Height at Pivot Pins: 1634
- Breakout Force @ Pivot Pins: 2696
- Rated Flow (Tractor System): 7.6 gpm
- Attachment Width: 66 in.
- Attachment Rated Capacity: 10.8ft. 3
- Cycle Times @ rpm: 2400
- Raise Boom (seconds): 3.5
- Lower Boom (seconds): 2
- Dump Attachment (seconds): 2.6
- Retract Attachment (seconds): 1.5
- Loader Transport Weight: 985
- Backhoe Model: 2538B
- Transport Height (max): 119 in.
- Transport overhang: 44.7 in.
- Maximum Digging Depth: 94 in.
- Digging Depth (2’ flat bottom): 92 in.
- Overall Operating Height- fully raised: 120 in.
- Loading Height (bucket at 60°): 63 in.
- Loading Reach (bucket at 60°): 51 in.
- Reach from Swing Post: 127 in.
- Bucket Rotation: 175 deg.
- Swing Arc: 180 deg.
- Stabilizer Spread Operating Position: 101 in.
- Stabilizer Down Below Grade: 11 in.
- System Relief Valve Setting (psi): 2050
- Digging Force - Bucket (lbs.): 3190
- Digging Force - Dipper (lbs.): 1980
- Transport Weight (lbs.): 1271
- Engine Type
- Naturally aspirated
- 37.4 hp (27.5 kW)
- PTO HP
- 31 hp (23.1 kW)
- Rated RPM
- 2400 rpm
- 94.4 in. (2400 mm)
- 63.2 in. (1605 mm)
- 3130 lb.
- Tire Size
- Ag (Front / Rear): 7-16 6PR / 11.2-24 4PR ; Industrial (Front / Rear): 10-16.5 / 43x16-20
- Fuel System
- Direct injection diesel
- Fuel Capacity
- 9.0 gal.
- HST-3 range
- Wet Disc
- Type: Open center with position control; Pump Output: 7.6 gpm
- Drive Type